- Manuals
- Brands
- Stihl Manuals
- Engine
- KM 56 R
- Instruction manual
Hide thumbs Also See for KM 56 R:
- Instruction manual (20 pages) ,
- Instruction manual (20 pages)
- Contents
- Table of Contents
- Bookmarks
Table of Contents
-
Table of Contents
-
Kombisystem
-
Guide to Using this Manual
-
Safety Precautions and Working Techniques
-
Approved Kombitools
-
Mounting the Loop Handle
-
Carrying Ring
-
Fuel
-
Fueling
-
Starting / Stopping the Engine
-
Operating Instructions
-
Cleaning the Air Filter
-
Adjusting the Carburetor
-
Spark Plug
-
Engine Running Behavior
-
Storing the Machine
-
Maintenance and Care
-
Minimize Wear and Avoid Damage
-
Main Parts
-
Specifications
-
Maintenance and Repairs
-
Disposal
-
EC Declaration of Conformity
Advertisem*nt
Quick Links
- 1 Table of Contents
- 2 Operating Instructions
- 3 Adjusting the Carburetor
- 4 Main Parts
- 5 Specifications
- 6 Maintenance and Repairs
- Download this manual
STIHL KM 56 R
Instruction Manual
Table ofContents
Advertisem*nt
Table of Contents
Related Manuals for Stihl KM 56 R
-
Trimmer Stihl KM 56 R Instruction Manual
(20 pages)
-
Tools Stihl KM 56 R Instruction Manual
(20 pages)
-
Engine Stihl 4180 Series Manual
Basismotor (66 pages)
-
Engine Stihl KMA 130 R Instruction Manual
Kombimotor (356 pages)
-
Engine Stihl KMA 135 R Instruction Manual
(28 pages)
-
Engine Stihl EVC 200 Instruction Manual
(152 pages)
-
Engine Stihl Cutquik TS 460 Service Manual
(80 pages)
-
Engine Stihl EVC 4000 Instruction Manual
(144 pages)
-
Engine Stihl EHC 600 Instruction Manual
(92 pages)
-
Engine Stihl 4-MIX Troubleshooting And Repair Instructions
(12 pages)
-
Engine Stihl BT 45 Manual
(43 pages)
-
Engine Stihl EHC 700 Instruction Manual
(92 pages)
Summary of Contents for Stihl KM 56 R
- Page 1 STIHL KM 56 R Instruction Manual...
-
Page 3: Table Of Contents
Minimize Wear and Avoid Damage Main Parts Specifications Maintenance and Repairs Disposal EC Declaration of Conformity This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. KM 56 R, KM 56 RC... -
Page 4: Kombisystem
English Symbols in text KombiSystem Guide to Using this Manual In the STIHL KombiSystem a number of WARNING Pictograms different KombiEngines and KombiTools Warning where there is a risk of an can be combined to produce a power accident or personal injury or serious tool. -
Page 5: Safety Precautions And Working Techniques
Working Techniques property. power tool by STIHL or are technically identical. It is important that you read the The machine should only be provided or Special safety precau - chapter on "Approved KombiTools". - Page 6 – do not Place the power tool on firm ground in an open area. Make sure you have good balance and secure footing. Hold the KM 56 R, KM 56 RC...
- Page 7 Check and correct the idle speed setting possibilities, these symptoms may be at regular intervals. STIHL recommends caused by an excessively high you have this work done by a STIHL Always hold the unit firmly with both concentration of exhaust gases in the servicing dealer.
- Page 8 Do not operate your power tool with the Use only a spark plug of the type choke lever in the warm start position < approved by STIHL and make sure it is – the engine speed cannot be controlled Maintenance and Repairs in good condition –...
-
Page 9: Approved Kombitools
The barrier bar comes as a standard KW-KM Sweeper drum with the machine and must be mounted assembly to the loop handle. The included barrier bar on the loop handle must be used - see also "Mounting the Loop Handle” KM 56 R, KM 56 RC... - Page 10 Insert the screws (7) in the holes and screw them into the barrier bar as far as they will go Go to "Adjusting and Securing the Loop Handle" Always leave the barrier bar attached. KM 56 R, KM 56 RC...
-
Page 11: Carrying Ring
Use a canister approved for storing Use only high-quality brand-name fuel. Pour oil into canister first, then gasoline with a minimum octane rating add gasoline and mix thoroughly. of 90 – leaded or unleaded. KM 56 R, KM 56 RC... -
Page 12: Fueling
30 days. Exposure to light, the sun, low or high temperatures can quickly make the fuel mix unusable. STIHL MotoMix may be stored for up to 2 years without any problems. Thoroughly shake the mixture in the canister before fueling your machine. -
Page 13: Starting / Stopping The Engine
0 position, the ignition is switched off. The ignition is switched on again automatically after the engine stops. Press in the choke lever (5) and turn it to < at the same time. KM 56 R, KM 56 RC... - Page 14 Engine stalls in cold start position g or so that the starter rope can rewind under acceleration properly. Move the choke lever to < and Continue cranking until engine runs. continue cranking until the engine runs. KM 56 R, KM 56 RC...
-
Page 15: Operating Instructions
Empty the fuel tank and keep the machine in a dry place, well away from sources of ignition, until you need it again. For longer out-of- service periods – see "Storing the Machine". KM 56 R, KM 56 RC... -
Page 16: Adjusting The Carburetor
Cutting attachment runs when engine is idling Turn the idle speed screw (LA) counterclockwise until the cutting attachment stops running and then turn the screw about another 1/2 to 3/4 turn in the same direction. KM 56 R, KM 56 RC... -
Page 17: Engine Running Behavior
Arcing may occur if the adapter nut (1) is loose or missing. Working in an easily combustible or explosive atmosphere may cause a fire or an explosion. This can result result in serious injuries or damage to property. KM 56 R, KM 56 RC... -
Page 18: Storing The Machine
Remove, clean and check the attachment. Coat metal parts with corrosion inhibiting oil. Store the machine in a dry and secure location Keep out of the reach of children and other unauthorized persons. KM 56 R, KM 56 RC... -
Page 19: Maintenance And Care
Spark plug Replace after every 100 operating hours Visual inspection Cooling inlets Clean All accessible screws and nuts (not adjust - Retighten ing screws) Safety labels Replace STIHL recommends an authorized STIHL servicing dealer. KM 56 R, KM 56 RC... -
Page 20: Minimize Wear And Avoid Damage
Spark plug – servicing dealer. STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL KM 56 R, KM 56 RC... -
Page 21: Main Parts
10 Machine support 11 Throttle trigger 12 Throttle trigger lockout 13 Stop switch 14 Carrying ring 15 Loop handle 16 Barrier bar 17 Shaft 18 Coupling sleeve 19 Wing screw 20 Sleeve Serial number KM 56 R, KM 56 RC... -
Page 22: Specifications
KM 56 RC with ErgoStart: 4.3 kg described in this instruction manual. The ISO 22867, ISO 11789 type approval expires if the engine is modified in any way. Handle, left KM 56 RC: 4.7 m/s ... 8.5 m/s KM 56 R, KM 56 RC... -
Page 23: Maintenance And Repairs
Take the product, Serial identification replacement parts which have been accessories and packaging to an number: 4144 approved by STIHL for this power tool or approved disposal site for environment- are technically identical. Only use high- friendly recycling. Displacement: 27.2 cc... - Page 24 English Done at Waiblingen, 03.02.2020 ANDREAS STIHL AG & Co. KG Dr. Jürgen Hoffmann Head of Product Data, Regulations and Licensing KM 56 R, KM 56 RC...
- Page 25 English KM 56 R, KM 56 RC...
- Page 26 English KM 56 R, KM 56 RC...
- Page 28 0458-540-0121-C englisch www.stihl.com *04585400121C* 0458-540-0121-C...
This manual is also suitable for:
Km 56 rc